Set of high quality PRECISION 20mm HUBCENTRIC SPACER KIT for FORD and many other cars that have 4 studs per wheel (4x108mm Hub).

PLEASE MAKE SURE THE BACK OF THE WHEELS HAVE A SHAMFERED EDGE TO ACCOMODATE THE TAPERED START OF THE HUBCENTRIC LIP

You will receive
1 pair x 20mm Precision (FORD 63.3mm) Hubcentric Spacers.

These spacers have been manufactured and designed in house by Creations Motorsport and are made especially for the Ford brand of cars. However they may also fit other brands with 4x108mm PCD hubs.

These hubcentric spacers have a 63.3mm centre bore on both the internal.

The spacers are made out of a single block of 100% aluminium and not welded.

These spacers are hubcentric meaning they will sit flush on the hub. At Creations Motorsport We dont sell universal or or floating spacers as they cause too much fitment issues and vibrations.

These spacers will fit securely onto your wheel hub. The alloy wheel will then fit directly onto our wheel spacer allowing for perfect fitment and no wheel wobble at all unlike other universal spacers.

Please make sure your hub lip does not protrude more than 20mm on your wheels. If unsure please ask.

Disclaimer

Please note due to many issues with customers fitting incorrect spacers to their cars, we have had to put up this disclaimer so that customers understand the importance of correct fitment of spacers.

When purchasing our hub centric spacers and as different models of cars come with different hubs, it is the responsibility of the customer to make sure that the hub lip on the hub does not protrude more than the inner diameter of the spacer. For example if you purchase 10mmm spacers and your hub lip protrudes by 12mm then you will not be able to fit the 10mm spacers without snapping the ring on the hub centric lip of the spacer.

Also please note before fitting any spacers it is imperative that the hub is thoroughly cleaned with a wire brush and greased prior to fitting and please make sure the spacer is sitting flat and the inner face of the wheel does not foul the spacer.

If the lip of the hub is 12mm then you need at least a 12mm space inside the spacer to make sure of correct fitment. If you are unsure please ask. Please do not fit spacers until you have checked this measurements otherwise you will damage the spacers and we will not be able to accept any refunds.

Many people won’t tell you about fitment issues please make sure you follow these guidelines to endure there are no issues after the purchase.

Remember we only sell hub centric spacers and do not sell floating spacers hence the reason they have to be precision fitted.

It is the responsibility of the customer to check the type of bolts they require and what length they need as we only supply the longer bolts as described in the listing.

Please ask if unsure...

Please remember we manufacture all our own tuning parts (except for OEM parts) we DO NOT mass bulk buy and box shift. We pride ourselves on quality and affordable tuning without the middle man and without the astronomical prices of other tuning companies. All our own products come with our company logo embossed or stamped on them.