The nylon bush on the end of the selector cable wears over time and simply pops off. The nylon material is very soft; as it operates on a metal ball joint it wears prematurely causing this fault. The vehicle manufacturer?s solution to this issue is to replace the gear selector cable (at a great cost), this however will wear in the same way as the original and the issue will reoccur. Some customers have advised us of some replacement cables only lasting 3 months before popping off again.

The symptoms of this fault are very obvious; the gear stick moves freely up and down but won't select a gear, there are issues with gear selection or inability to select any gear at all. The gear linkage cable can also be completely detached from the gearbox.

Fit our clamp on to the bush end and tightly secure the cable to the ball joint for life.

Our uniquely designed item securely clamps the selector cable bush to the gear box, restoring the function of the gear box within minutes - for the lifetime of your vehicle. Our item features a dual clamp design so there is no possibility of the joint working loose ever again. A strong sleek design finished in mirror polished stainless steel. Fitment is very simple and can be carried out in situ under the bonnet. Full instructions are included.

Vehicles Covered
- Vauxhall Vivaro 2001- onwards
- Renault Trafic 2001- onwards
- Nissan Primastar 2001- onwards
5 and 6 speed gearbox, PK5 5 speed, PF6 PK6 6 speed.

Associated Part Numbers:
93198347, 7701477671, 7701473971, 4432979, 7701477672, 112883, 34828, 4432979, 93198015, 8201283105.

Content
1X Stainless steel gear linkage clamp with screws ready to fit.

Please check out our Install Guide page for further help when carrying out the installation