It is a common fault on these vehicles for the EGR valve to become clogged with recirculated exhaust gas carbon deposits, often substantially limiting air flow and or stopping function of the EGR Valve, causing vehicle faults. Our repair allows you to replace the faulty EGR and stop these deposits entering the intake manifold and engine in future.

Some symptoms to look out for
Rough engine running
Misfiring
Decreased throttle response
Loss of power or torque
Smokey engine
Low MPG / decreased MPG
Vehicle stalling at low speeds
Acceleration slow / sluggish

CARBON RICH RECIRCULATED EXHAUST GASSES LEAVE DEPOSITS WITHIN THE EGR VALVE WHICH RESTRICT OR DAMAGE THE EGR VALVE CAUSING VEHICLE FAULTS.

The EGR valve on these vehicles is designed to redirect a portion of the vehicles exhaust gases back to the engine through the intake manifold. Carbon rich recirculated exhaust gasses enter the EGR valve before the intake manifold, over time Carbon deposits gather in the EGR valve and can interfere with the operation of the EGR valve flap and can block air flow.

Resulting in reduced fuel economy and vehicle performance. Often this build up damages the EGR valves which are expensive to replace. This malfunction of the valve or blocking of the exhaust port causes Detonation (also known as pinging or spark knock) causing misfiring or rough idle. Many examples can be found across the internet showing these EGRs completely blocked up with carbon; significantly reducing airflow to the intake.

OUR KIT ALLOWS EASY REPLACEMENT OF THE EGR VALVE WITH OUR IMPROVED DESIGN PART WHICH STOPS ANY RECIRCULATED EXHAUST GASES ENTERING THE INTAKE MANIFOLD. RESOLVING VEHICLE FAULTS AND STOPPING CARBON BUILD UPS IN FUTURE.

Install our completely Stainless Steel EGR blank and eliminate build up in the intake manifold. This allows the engine to breath better which can improve vehicle performance and fuel efficiency. Our EGR blanking kit stops these recirculated exhaust gases entering the intake manifold, eliminating the risk of future build ups.

Our kit is the most comprehensive available including all components required to delete the EGR valve and will fit in the same way as the OEM part. You will receive:
- 1x Stainless steel EGR tube, precision machined and all constructed from stainless steel, featuring a substantial bead to ensure an air tight seal with the boost hose.
- 4x Stainless steel EGR to intake manifold bolts.
- 1x Intake manifold to EGR gasket.
- 1X solenoid vacuum pipe blanking plug with cable tie to secure.
- 1X Exhaust manifold blank with high temperature gasket and fasteners allowing you to remove the EGR to Exhaust manifold flexible tube that often blocks or splits.

Our kit is top of the range and the most comprehensive kit available. Check out our instructions and video to see how our kit allows you to successfully eliminate the EGR valve on your vehicle.

Possible advantages of EGR deleting:
- Turbo can spool up quicker and at lower revs resulting in less turbo lag.
- Prevents carbon build-up inside intake manifold and ports.
- Smoother pick up from idle, engine running and better fuel economy.
- Increases in power and / or torque which slowly fades as carbon builds up.
- Improved fuel consumption / MPG.

VEHICLES AFFECTED
- LAND ROVER DISCOVERY MK 2 MK II TD5, 1998-2004, ALL MODELS.
- LAND ROVER DEFENDER, TD5, 1998-2006, ALL MODELS.
ENGINE CODES 10P, 15P AND 16P.

ASSOCIATED PART NUMBERS:
7.22434.04, ERR6620, WAV100270, WAV000020.

IF YOUR VEHICLE IS FITTED WITH AN EGR COOLER YOU WILL NEED OUR KIT HERE INSTEAD.

PART NUMBERS ARE FOR GUIDANCE ONLY, PLEASE INSPECT YOUR EGR TO ENSURE YOU ARE PURCHASING THE CORRECT KIT.

Content
- 1x Stainless steel EGR tube
- 4x Stainless steel EGR to intake manifold bolts.
- 1x Intake manifold to EGR gasket.
- 2x solenoid vacuum pipe blanking plugs with cable ties to secure.
- 1x Exhaust manifold blank with high temperature gasket and fasteners.

Please check out our Install Guide page for further help when carrying out the installation