This is set of high quality PRECISION 15mm HUBCENTRIC SPACER KIT for VW SEAT SKODA and many other cars that have 4 studs per wheel (4x100 Hub) SEE LIST BELOW.

You will receive
- 1 pair x 15mm Precision (VW 57.1mm) Hubcentric Spacers.

The Total Diameter Of these 15mm Spacers Is 134mm.

MODELS COVERED

Volkswagen / Seat / Skoda
- VW GOLF MK1 inc GTi & Cabriolet
- VW GOLF MK2 inc GTi
- VW GOLF MK3 (4 stud models only)
- VW LUPO
- VW JETTA MK1 (1979-1999 4 stud models only)
- VW CORRADO
- VW DERBY
- VW POLO MK1/2/3/4/5 (4 stud models only)
- VW PASSAT (4 stud models only)
- VW SCIROCCO (4 stud models only)
- SEAT IBIZA
- SEAT AROSA
- SEAT INCA VAN
- SEAT TOLDEO MK1
- SKODA FELICIA

These spacers have been manufactured and designed in house by Creations Motorsport and are made especially for the VAG brand of cars. However they may also fit other brands with 4x100 PCD hubs.

These hubcentric spacers have a 57.1mm centre bore on both the internal and external face.

The spacers are made out of a single block of 100% aluminium and not welded. These spacers are hubcentric meaning they will sit flush on the hub. At Creations Motorsport We don't sell universal or or floating spacers as they cause too much fitment issues and vibrations.

These spacers will fit securely onto your wheel hub. The alloy wheel will then fit directly onto our wheel spacer allowing for perfect fitment and no wheel wobble at all unlike other universal spacers.

The recommended bolts for these spacers are M14x1.5x45mm, there are 2 options which can be purchase from our website, raduis and tapered.

Please make sure your hub lip does not protrude more than 15mm on your wheels.

Please note, due to many issues with customers fitting incorrect spacers to their cars, we have had to put up this disclaimer so that customers understand the importance of correct fitment of spacers.

When purchasing our hub centric spacers and as different models of cars come with different hubs, it is the responsibility of the customer to make sure that the hub lip on the hub does not protrude more than the inner diameter of the spacer. For example if you purchase 10mmm spacers and your hub lip protrudes by 12mm then you will not be able to fit the 10mm spacers without snapping the ring on the hub centric lip of the spacer.

Also please note before fitting any spacers it is imperative that the hub is thoroughly cleaned with a wire brush and greased prior to fitting and please make sure the spacer is sitting flat and the inner face of the wheel does not foul the spacer.

If the lip of the hub is 12mm then you need at least a 12mm space inside the spacer to make sure of correct fitment. If you are unsure please ask. Please do not fit spacers until you have checked this measurements otherwise you will damage the spacers and we will not be able to accept any refunds.

QUALITY GUARANTEED