High quality brake adapters to allow fitment of Porsche 996 / Porcshe Boxster S / Carrera 2/4 fronts Brembo brake calipers utilising the 330mm discs. The part numbers for the calipers are 996.351.425 and 996.351.426 these will allow for a 330mm disc. A popular disc option for this upgrade is to utilize the 330mm x 28mm disc from the Alfa Brera. Please note the Alfa Brera disc will need to be re-pcd'd to 5 x 100 this can be done at any local machine shop for around £20. These are finished with the highest quality and are made out of high tensile SG strength Steel not cheap aluminium standard that will crack under braking force. The adapters are made out of a single piece of steel and are not welded but machined out a single block of steel. I supply High strength 12.9 rated strength bolts with these brackets. Models covered VW GOLF/BORA IV - Audi A3/TT 1.8T - Seat Leon 1.8T- Skoda VRS any 5 x 100 VAG Hub and many more.. The adapters are supplied with bolts and mounting hardware and the adapters come powder coated to prevent rust and hand finished with the highest quality. These brackets have been tested on the track and with the material used weigh 1.9KG with washers and bolts. They are not cheap alloy rubbish supplied by other manufacturers which I have seen many times crack or split under brake force. These brackets have been purchased by many enthusiasts and forums members all over the globe check our feedback on this it speaks for itself.
- Be the first to review this product