High Quality brake adapters to allow fitment of Brembo Brake caliphers utilising the standard VAG 5 x 112 PCD. We also supply 330mm x 28mm x112pcd discs. Distance between caliper mounting holes is 130mm, and the distance between the hub mounting holes is 145mm The number parts for these caliphers are 996.351.425 and 996.351.426, these will allow for a 330mm disc. The Brake adapters are finished with the highest quality and are made out of high tensile SG strength steel, not standard cheap aluminium that will crack under braking force. These adapters are made from a single piece of steel and are not welded but HH machined out of a single block of steel. They are also powder coated to prevent rust. High quality strength 12.9 rated bolts and hardware are supplied with these adapters. Models covered VWgolf/bora mk4- Audi A3/S3/TT 1.8T- Seat leon 1.8T- Skoda VRS/Octavia MK1- Porsche 996/Boxster/Boxster S and any 5 x 100 VAG Hub Vehicle. We also sell the drilled OEM porsche 5 x 112 330 x 28mm discs and also have the braided hoses VAG to Porsche fitment in stock. Please note that you may need spacers to clear the wheels as the 996 caliper is quite wide. We also sell a wide range of spacers to accomadate this. Check the quality on the picture and compare it to any other hose on the market today and you will not be dissappointed. We sell many of these parts to enthusiasts around the world as well as on the VW/Audi forums and at major events such as the GTI International. QUALITY GUARANTEE - FULL MONEY BACK GUARANTEE IF YOU ARE NOT FULLY SATISFIED.
- Be the first to review this product