High Quality brake adapters to allow fitment of Brembo Brake caliphers utilising the standard VAG 5 x 100 PCD 334 x 32mm R32 discs.

The part numbers for these caliphers are as follows
- Left - 7L6-615-123T
- Right - 7L6-615- 124T

These calipers are off a VW Touareg and Audi Q7.
- Left - 7L6-615-105AQ
- Right - 7L6-615-106AQ

These calipers are off a VW Touareg and Audi Q7.

Other 17zl calipers are from the Porsche Cayenne, part numbers areas follow
- 20 8432 05 2 and 20 8432 06 1

You can also utilise the Porsche front ZR 17 caliper. The calipers are usually mounted on a 330 x 32mm disc and will state 17ZL 17ZR on them.

The Brake adapters are finished with the highest quality and are made out of high tensile SG strength steel, not standard cheap aluminium that will crack under braking force. These adapters are made from a single piece of steel and are not welded but HH machined out of a single block of steel.

These brackets will fit under many wheels and it all depends on the wheels offset. If you require spacers to clear the calipers please look at the spacers we supply to clear the calipers.

High quality strength 12.9 rated bolts and hardware are supplied with these adapters.

Models covered
- VW Golf/Bora Mk4
- Audi A3/S3/TT 1.8T
- Seat Leon 1.8T
- Skoda VRS/Octavia MK1
- Porsche 996/Boxster/Boxster S
And any 5 x 100 VAG Hub Vehicle.

Check the quality on the picture and compare it to any other hose on the market today and you will not be disappointed. We sell many of these parts to enthusiasts around the world as well as on the VW/Audi forums and at major events such as the GTI International.

QUALITY GUARANTEED.