High quality AN4 - AN12 stainless steel braided fuel hose. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.

Made of high-quality NBR material on the inside that gives them high chemical and heat resistance, along with a braided stainless steel outside which gives them high durability and pressure resistance.

Professional and high-tech design, can be used under continuous flexing and vibration conditions.

Easy to install, the smooth bore provides optimal flow during operation.

Please note, if you add a clamp separator on this listing, then the number of clamps sent would depend on the number of meters specified in the quantity section, so if you purchase 10 meters of braided hose and you require clamps, then you will be sent 10 clamps. If you would like different quantities, then please select 'No clamps' on this page and purchase them separately by clicking here

Specifications:
Material: 304 Stainless Steel Wires & NBR
Color: Silver
Working Temperature: -40℃ to +100℃
Working Pressure: 7Mpa/1015psi
Burst Pressure: 42Mpa/6000psi

*AN4 inner diameter =5.6mm; outer diameter = 11MM (Approx.)
*AN6 inner diameter =8.7mm; outer diameter = 14MM (Approx.)
*AN8 inner diameter =11.11mm; outer diameter = 16.2MM (Approx.)
*AN10 inner diameter =14.2mm; outer diameter = 20MM (Approx.)
*AN12 inner diameter =17.2mm; outer diameter = 24MM (Approx.)

Application: Fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes.

We also sell the aluminum 'AN' push-on adaptors, as well as the pipe separator clamps separately.