High quality brake adapters to allow fitment of Porsche 996 / Porcshe Boxter s / Brembo brake calipers utilising the standard VAG 5 X 100 PCD 312mm discs. The part numbers for the calipers are 996.352.421 and 996.352.422 these will allow for a 312mm disc upto a max of 325mm. These are finished with the highest quality and are made out of high tensile SG strength Steel not cheap aluminium standard that will crack under braking force. The adapters are made out of a single piece of steel and are not welded but machined out a single block of steel. I supply High strength 12.9 rated strength bolts with these brackets. The adapters are supplied with bolts and mounting hardware and the adapters come powder coated to prevent rust and hand finished with the highest quality. These brackets have been tested on the track and with the material used weigh 1.9KG with washers and bolts. They are not cheap alloy rubbish supplied bu other manufacturers which I have seen many times crack or split under brake force. These brackets have been purchased by many enthusiasts and forums members all over the globe check our feedback on this it speaks for itself. These brackets also fit the mk3 VR6 with some additional 6mm lateral spacers if fitting to a MK3 VR6.
- Be the first to review this product