This is a set of high quality PRECISION 12mm HUBCENTRIC SPACER KIT for Mercedes and many other cars that have 5 studs per wheel (5x112mm Hub).

You will receive
1pair x 12mm Precision (Mercedes 66.6mm) Hubcentric Spacers. The Outside Diameter Of These Spacers Is 149mm

MODELS COVERED

YEAR MAKE MODEL BOLT PATTERN STUD SIZE HUB BORE

ALL MERCEDES BENZ 107 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 116 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 124 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 126 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 129 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 140 CHASSIS 5x112 14x1.5 66.6
ALL MERCEDES BENZ 170 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 201 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 202 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 203 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 208 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 210 CHASSIS 5x112 12x1.5 66.6
ALL MERCEDES BENZ 215 CHASSIS 5x112 12x1.5 66.6

These spacers have been manufactured and designed in house by Creations Motorsport and are made especially for the Mercedes brand of cars. However they may also fit other brands with 5x112mm PCD hubs.

The recommended bolts for these spacers are M12x1.5x40mm with 60 degree taper seat, these be purchase from our Wheel Bolts section.

These hubcentric spacers have a 66.6mm centre bore on both the internal and external face with an outside diameter of 149mm

The spacers are made out of a single block of 100% aluminium and not welded.

These spacers are hubcentric meaning they will sit flush on the hub. At Creations Motorsport We don't sell universal or or floating spacers as they cause too much fitment issues and vibrations.

These spacers will fit securely onto your wheel hub. The alloy wheel will then fit directly onto our wheel spacer allowing for perfect fitment and no wheel wobble at all unlike other universal spacers.

Please make sure your hub lip does not protrude more than 12mm on your wheels. If unsure please ask.

Please note due to many issues with customers fitting incorrect spacers to their cars, we have had to put up this disclaimer so that customers understand the importance of correct fitment of spacers.

When purchasing our hub centric spacers and as different models of cars come with different hubs, it is the responsibility of the customer to make sure that the hub lip on the hub does not protrude more than the inner diameter of the spacer. For example if you purchase 12mm spacers and your hub lip protrudes by 15mm then you will not be able to fit the 12mm spacers without snapping the ring on the hub centric lip of the spacer.

Also please note before fitting any spacers it is imperative that the hub is thoroughly cleaned with a wire brush and greased prior to fitting and please make sure the spacer is sitting flat and the inner face of the wheel does not foul the spacer.

If the lip of the hub is 15mm then you need at least a 15mm space inside the spacer to make sure of correct fitment. If you are unsure please ask. Please do not fit spacers until you have checked this measurements otherwise you will damage the spacers and we will not be able to accept any refunds.

Many people won’t tell you about fitment issues please make sure you follow these guidelines to endure there are no issues after the purchase.

Remember we only sell hub centric spacers and do not sell floating spacers hence the reason they have to be precision fitted.

It is the responsibility of the customer to check the type of bolts they require and what length they need as we only supply the longer bolts as described in the listing.

Please ask if unsure...

Please remember we manufacture all our own tuning parts (except for OEM parts) we DO NOT mass bulk buy and box shift. We pride ourselves on quality and affordable tuning without the middle man and without the astronomical prices of other tuning companies. All our own products come with our company logo embossed or stamped on them.