VW AUDI SEAT SKODA TDI FSiT ALLOY BAYONET BOOST HOSE INTERCOOLER HOSE COUPLER

This Alloy Hose Connector is used to convert standard hoses to push fit locking hoses.

The boost hoses are famous for leaking on any VAG car. These are state of the art precision machines ally couplers for a much tighter fit and also have solid connect clips unlike the original weak connectors.

Upgrade your boost hoses and remove those boost leaks forever and get rid of that excess black smoke cause by overfueling on the TDI'S, TFSi and FSiT VAG cars. This is a permanent solution and is a fraction of the cost of a new hose.

Simply remove the old metal collar off the old hose and fit this with a jubilee clip on the hose end and the same OEM fitting on the boost pipe or turbo/intercooler end. Please note that you will need to re-use the OEM rubber seal.

There are 9 different sizes available. These are ideally suited to VAG applications but will fit many other manufacturers' vehicles, just measure your existing coupling.

Note: Coupler 'O' ring seal are not supplied so please make sure you retain and use your original OEM 'O' ring seal.


50-38mm (AL0008)
50mm clip side outside diameter (o.d) male coupling, suitable for a 38mm internal diameter (i.d) hose.

50-51mm (AL0007)
50mm clip side outside diameter (o.d) male coupling, suitable for a 51mm internal diameter (i.d) hose.

60-51mm (AL0003)
60mm clip side outside diameter (o.d) male coupling, suitable for a 51mm internal diameter (i.d) hose.

64-52mm (AL0011)
63mm clip side outside diameter (o.d) male coupling, suitable for a 52mm internal diameter (i.d) hose.

64-54mm (AL0004)
64mm clip side outside diameter (o.d) male coupling, suitable for a 54mm internal diameter (i.d) hose.

64-61mm (AL0006)
64mm clip side outside diameter (o.d) male coupling, suitable for a 61mm internal diameter (i.d) hose.

64-63mm (AL0009)
64mm clip side outside diameter (o.d) male coupling, suitable for a 63mm internal diameter (i.d) hose.

68-54mm (AL0010)
68mm clip side outside diameter (o.d) male coupling, suitable for a 54mm internal diameter (i.d) hose.

68-63mm (AL0005)
68mm clip side outside diameter (o.d) male coupling, suitable for a 63mm internal diameter (i.d) hose.