Exclusive new oversized silicone turbo intake pipe for that extra increased air flow. This pipe is an absolute must on a remapped car. We have seen significant gains on mapped cars with this oversized pipe. This pipe has around 30% more capacity compared to the standard turbo intake pipe.

Models covered
- VW GOLF/BORA IV
- Audi A3/TT 1.8T
- Seat leon 1.8T
- Skoda VRS
1.8T 20VT 3" MAF WITH Engine codes AGU and ARZ

PLEASE NOTE THIS PIPE WILL FIT THE STANDARD K03 and K03S turbos with a 45mm inlet, and a 3" (80mm) MAF end fitting. Also, on some very early AUM engine cars you might need a blanking plug to one of the small breather holes as some earlier cars did not have the breather at the bottom. It can be blanked off easily enough with a jubilee clamp and a blank piece of metal/bolt/blanking plug etc.

Unlike the standard rubber OEM hoses which deteriorate over time and collapse when under pressure, our hoses are constructed using a high quality silicone Polyester or Nomex compound. They are further reinforced with a polyester layer to provide a more rigid structure, this helps prevent the collapse of the hose under high boost conditions whilst sustaining pressure, and this is essential for the smooth delivery of power and quicker turbo spool which results in increased performance and improved throttle response.