Description High quality brake adapters to allow fitment of rear Porsche 996 / Porsche Boxter S / Brembo brake calipers utilising the standard VW Golf MK3/Corrado VR6 G60 GTI 16V 280mm x 22mm 5 x 100 PCD vented front brake discs with part numbers 1H0 615 301A. The part numbers for the calipers are 996.352.421 and 996.352.422 and will allow for 280mm x 22mm discs. The Porsche calipers are connected to the hydraulic system of the vehicle for increased braking force. But since they have no hand brake function therefore the rear Audi S3 or Golf 4 R32 original caliper is used for the handbrake function only. The hydraulic connection on the original original S3 and R32 caliper is therefore closed, so requires a blanking plug, as it serves only as a handbrake caliper. These are finished with the highest quality and are made out of high tensile SG strength Steel not cheap aluminium standard that will crack under braking force. The adapters are made out of a single piece of steel and are not welded but machined out a single block of steel. We supply High strength 12.9 rated strength bolts with these brackets. 1.8T 2WD Models Covered VW Golf/Bora 1J Audi A3/S3 8L Audi TT 8N Seat Leon/Cupra R 1M Skoda Octavia 1U The adapters are supplied with bolts and mounting hardware and are hand finished to the highest quality. These brackets have been tested on the track and with the material used weigh 1.9KG with washers and bolts. These brackets have been purchased by many enthusiasts and forums members all over the globe check our feedback on this it speaks for itself. Your will receive- 2x caliper mounting brackets for Porsche calipers 2x caliper mounting brackets for the original S3 / R32 rear handbrake calipers The kit also includes high strength bolts and spacers. Parts required for conversion: Porsche caliper Part no: 996 352 421 996 352 422 Caliper Golf 4 R32 left VW Part Number 8N0615423C, caliper right VW Part Number 8N0615424C, Brake caliper carriers VW Part Number 8N0 615 425 B or painted in blue for R32: 1J0 615 425 F. You will require the carriers to mount the S3 / R32 rear handbrake calipers. These are not supplied with this kit.
- Be the first to review this product