First of its kind developed exclusively by Creations Motorsport for a well known BMW racing team with high quality brake adapters to allow fitment of Porsche 996 / Boxster S / Cayman S Front Brembo brake calipers to the E46 M3 front. These adapters are designed for standard M3 325mm discs. This requires 12mm to be machined from the mounting boss of the caliper. Once they have been machined the E46 M3 325mm disc is a bolt on set up for this bracket. As far as we know these re the only kind available in the world for this setup.

The part numbers for the calipers are 996.351.425 & 996.351.426 these will allow for a E46 M3 325mm standard disc.

These are finished with the highest quality and are made out of high tensile SG strength Steel not cheap aluminium standard that will crack under braking force. The adapters are made out of a single piece of steel and are not welded but machined out a single block of steel. We supply High strength 12.9 rated strength bolts with these brackets.

Please note that on some BMW hubs you may need to grind about 3mm off the outer of the hub because some of the hubs came with a casting protrusion of about 3mm on the hub ends. See picture of the grinded 3mm off the hub end.

The adapters are supplied with bolts and mounting hardware and the adapters come powder coated to prevent rust and hand finished with the highest quality. These brackets have been tested on the track and with the material used weigh 1.37KG with washers and bolts. These brackets have been purchased by many enthusiasts and forums members all over the globe.

You will not be disappointed.

DIMENSIONS:
Distance between caliper mounting holes is 130mm
Distance between hub mounting holes is 120mm