My Cart

Silicone Turbo Intake Pipe For 3'' MAF 1.8T 20V VW / Audi / Seat / Skoda

In stock
SKU
5055943115453
Views: 100
PRODUCT CODE : H0004D
From £115.00

SILICONE TURBO INTAKE PIPE FOR 3'' MAF 1.8T 20V TO FIT ENGINES WITH CODES AUM / AUQ (H0004D)

This product was primarily designed for the standard K03 and K03S turbo cars and utilising theᅠ3" MAF housing fromᅠAudi S3 Leon Cupra R TT 225 for increased airflow without the need for additional hardware joins in the pipe etc. No need for additional silicone joins or hardware direct bolt on for K03/K03s with 45mm inlet and a direct fit on the 80mm or 3" MAF end.

Models covered
- VW GOLF/BORAᅠIV 1.8T
- Audi A3/TT 1.8T
- Seat leon 1.8T
- Skoda Octavia
With engine codes AUM, AUQ, AWU, AWP, AWD, AWW

THIS PIPE WILL FIT THE STANDARD K03 and the K03S turbos with a 3" MAF end fitting.

PLEASE NOTE: Due to this hose being oversized and the limited space available for fitting, you will find an obstruction caused by a metal coolant pipe which runs close to the turbo intake pipe,  you would be required to unbolt the metal coolant pipe from its mounting bracket and move slightly away from the engine to accommodate the oversized hose.  Professional installation is recommended. 

Unlike the standard rubber OEM hoses which deteriorate over time and collapse when under pressure, our hoses are constructed using a high quality silicone Polyester or Nomex compound. They are further reinforced with a polyester layer to provide a more rigid structure to prevent collapse of hose under high boost conditions whilst sustaining pressure which is essential for the smooth delivery of power and quicker turbo spool resulting in increased performance and improved throttle response.

Write Your Own Review
You're reviewing:Silicone Turbo Intake Pipe For 3'' MAF 1.8T 20V VW / Audi / Seat / Skoda